12 31 020 Removing And Installing/Replacing Alternator (N62) (Version 1)
Necessary preliminary tasks:
- Disconnect battery negative lead.
- Remove SUCTION FILTER HOUSING .
- Remove ELECTRIC FAN with cowl.
- Remove alternator DRIVE BELT .
Disconnect plug (3) from alternator.
Unscrew nut (1).
Lay B+ line (2) to one side.
Release screws (1).
Remove alternator (2).
Installation:
Modify guide pulley (3) to new alternator (replace if necessary).
Check DME (alternator) for correct operation.