41 62 000 Trunk Lid Removal And Installation

Remove and install panel for rear lid at top  . See 51 49 006 REMOVING AND INSTALLING/REPLACING TRIM FOR REAR LID AT TOP .

Unhook Bowden cable on rear lid lock.

Disconnect all plug and socket cable connections on rear lid.

Open nuts (1) on rear lid hinge to rear lid.

Adjust rear lid lock  . See 51 24 004 ADJUSTING REAR LID LOCK (LOWER SECTION OF REAR LID LOCK) .

Tighten nuts (1) again.

Fig 1: Identifying Nuts On Rear Lid Hinge

Courtesy of BMW OF NORTH AMERICA, INC.