17-2010 Adapter

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

0491403 172010 Adapter Minimum set: Mechanical tools MW

NOTE: (Adapter kit) For rinsing the oil cooler in automatic transmissions. [Released]

SI number

01 12 96 (103)

Consisting of:

Fig 1: Identifying Adapter (0491403)

Courtesy of BMW OF NORTH AMERICA, INC.

= 0493621 Plate
NOTE: (Mounting plate) For adapter 17 2 011 - Transmission: A5S/325Z Discontinued, only available via complete tool [cannot be ordered individually]

= 0491404 Adapter
NOTE: For connecting the oil cooler lines to the oil dispenser unit - Transmission: A5S 310Z, A5S 560Z, A5S 325Z Discontinued, only available via complete tool [cannot be ordered individually]
= 0491405 Adapter
NOTE: (Adapter (2 pieces)) For connecting the oil cooler lines to the oil dispenser unit - Transmission: A4S 310R Discontinued, only available via complete tool [cannot be ordered separately]
= 0491406 Screw
NOTE: (Banjo bolt (2 pieces)) Thread M18x1.5 with nut and gasket for connecting the oil cooler lines to the oil dispenser unit - \Transmission: A5S/440Z Discontinued, only available via complete tool [cannot be ordered individually]
= 0491407 Screw
NOTE: (Banjo bolt (2 pieces)) Thread M16x1.5 with nut, gasket and thread piece for connecting the oil cooler lines to the oil dispenser unit - transmission: A5S/300J Discontinued, only available via complete tool [cannot be ordered individually]
= 0491408 Connector
NOTE: (For oil dispenser unit from the company Tecalemit) Discontinued, only available via complete tool [cannot be ordered individually]
= 0491409 Connector
NOTE: (For oil dispenser unit from the company Horn) Discontinued, only available via complete tool [cannot be ordered individually]
= 0491410 Adapter
NOTE: (Clutch) Scope: 2 pieces [Released]
= 0491411 Hose
NOTE: (Hose, long) [released]
= 0491412 Hose
NOTE: (Hose, short) [released]