Removal & Installation
WARNING: This page is about a different car, the 2001 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
- Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM . Move front seat fully forward and upward. Remove lower seat belt anchor bolt, located on outboard seat frame.
- Remove 2 rear seat track mounting bolts. Move seat fully rearward. Remove 2 front seat track mounting bolts. Unlock and disconnect under seat harness connector. Protect door sill with protective cover and lift out front seat.
- To install, reverse removal procedure. Tighten seat track mounting and lower seat belt anchor bolts to specification. See TORQUE SPECIFICATIONS . Activate air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM .