Removal & Installation
WARNING: This page is about a different car, the 2003 BMW Z8, 2002 BMW Z8, 2001 BMW Z8, and 2000 BMW Z8. However, it is still accessible from the selected car via links, so may be relevant.
- Move wheels into straight ahead position.
- Unfasten nut-brace with open-end wrench. See Fig 1 .
- When installing, note that the stabilizer links are different and can be identified by the number on the tube. Odd number is left and even number is right. Replace self-locking nut and tighten to specification. See TORQUE SPECIFICATIONS .