52 13 040 Removing And Installing/Replacing Outer Cover On Left Or Right Front Seat (Normal/Semi-Electric)

Pull lever forward to remove:

• If necessary, lever out lower locking point (1) from rear with a screwdriver.

Unscrew bolt (2).

If necessary, move seat fully forwards and upwards.

Remove trim:

1. Unclip at top edge
2. Unclip at rear towards top side
3. Pull on belt opening
4. Unlock lugs
5. Carefully remove trim towards front

Unfasten plug connection.

Replacement only: 

Remove switch. See REPLACING SEAT ADJUSTMENT SWITCH COMBINATION (SEMI-ELECTRIC FRONT SEAT) or REMOVING AND INSTALLING/REPLACING SWITCH FOR FRONT LUMBAR SUPPORT .

Installation: 

Retaining clips and tabs must not be damaged.