63 12 010 Removing And Installing/Replacing Left Headlight (Xenon Headlight)
WARNING:
Follow instructions for HANDLING LIGHT BULBS (EXTERIOR LIGHTS) .
Unclip strip (1) in direction of arrow.
Release screws (2) underneath.
Turn cap (1) approx. 30° counterclockwise and remove from headlight (2).
Slacken screws (1)
Unfasten screws (2).
Installation:
- Observe GAP DIMENSIONS
- Adjust HEADLIGHTS
Pull bumper panel (1) forwards slightly and feed out headlight (2) in direction of arrow.
Installation:
Make sure headlight (2) is correctly seated in lower holder.
Unlock and disconnect associated plug connections (3).
Remove headlight (2).
Replacement:
- Unclip headlight holder (1) and remove.
- Remove IGNITION UNIT AND BULB FOR XENON HEADLIGHT (2)
- Remove CONTROL UNIT FOR XENON HEADLIGHT (3)
Installation:
Retaining lugs (1) on headlight holder (2) must not be damaged.
Make sure headlight holder (2) is correctly engaged on headlight.