LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2006 >> 330xi Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2304 (Front Axle - Tightening Torques - F13) >> Front Axle Suspension >> 31 10 Front Axle Suspension

31 10 Front Axle Suspension

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - FRONT AXLE SUSPENSION

  Type Thread Tightening specifications Dimension
1AZ Front axle support to engine support (screw connection, front, middle, rear) F01/F02/F03/F04/F06 (without M6)/F07/F10 (without M5)/F11/F12 (without M6)/F13 (without M6)/F18 M12 Observe repair instructions. 100 Nm
F25/F26 M12 Replace screws.  
Jointing torque 100 Nm
Angle of rotation 90 °
F06 M6/F10 M5/F12 M6/F13 M6 M10 Replace screws.  
Jointing torque 56 Nm
Angle of rotation 90 °
2AZ Thrust zone to front axle support F01/F02/F04/F06 (without M6)/F07/F10 (without M5)/F11/F12 (without M6)/F13 (without M6) M8 Replace screws.  
Jointing torque 15 Nm
Angle of rotation 90 °
F06 M6/F10 M5/F12 M6/F13 M6 M10 Replace screws.  
Jointing torque 56 Nm
Angle of rotation 90 °
F25/F26 M12   110 Nm
3AZ Acoustic strut to front axle support F01/F02 M8    
Jointing torque 15 Nm
Angle of rotation 90 °