51 34 211 Replacing rubber guide for rear left or right door window
- 00 9 317
Necessary preliminary tasks:
- Remove Cover On Inside Door Window Frame
- Release Trim On Window Guide and slide downwards slightly, do not remove
E91 only:
- Remove trim on window frame at rear
NOTE:
Window cavity cover strip does not have to be removed.
Lever out rubber guide (1) on door window frame at front (2) with special tool 00 9 317.
Pull rubber guide (1) out of window guide.
Detach rubber guide (1) in direction of arrow from door.
Installation:
Moisten rubber guide (2) with water.
Close door window glass (1) a little.
Push rubber guide (2) onto door window glass (1) and into window guide (3).