18 20 Exhaust system suspension
EXHAUST SYSTEM SUSPENSION TIGHTENING SPECIFICATION
| Type | Thread | Measure | |
|---|---|---|---|
| 1AZ Exhaust system to manifold | N52 / N52K / N51 | M10 nut | 45 Nm |
| 2AZ Preliminary pipe bracket to transmission | N52 / N52K / N51 | M8 | 21 Nm |
| 3AZ Bracket to rear differential | N52 / N46 / M47T2 / M57T2 | M12 nut | 30 Nm |
| 4AZ Bracket, rear muffler, to support plate | N52 / N52K / N51 | M8 nut | 21 Nm |
| 5AZ Rear muffler to body | N52 / N52K / N51 | M8 nut | 21 Nm |
| 6AZ Exhaust system to transmission | M47T2 ASA | M8 bolt | 21 Nm |
| 7AZ Exhaust system to body | N52 / N52K / N51, | M8 | 21 Nm |
| 8AZ Clamp | N52 / N52K / N51 | 45 Nm |