11 28 V-ribbed belt with Tension and Deflection Element (N52)
V-RIBBED BELT WITH TENSION AND DEFLECTION ELEMENT TIGHTENING SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Belt tensioner to engine block | N52 | M11x65 | Replace screw Thread repairs exclusively with Al Helicoil. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 25 Nm | |||
| Torque angle | 90 ° | |||
| 2AZ Deflection pulley to alternator | N52 | M10x40 | 40 Nm |