LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2006 >> 325i Automatic >> Repair and Diagnosis >> Restraints >> Seat Belts >> Restraints - Repair >> 11 Seat belts >> 72 11 030 Removing and installing/replacing front left or right seat belt

72 11 030 Removing and installing/replacing front left or right seat belt

Necessary preliminary tasks: 

Move backrest to full rearward position.

Unclip release tab (2) for belt anchor fitting trim (1) with plastic wedge.

Fig 1: Uncliping Release Tab
G04728053Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Tightening torque 72 11 2AZ. See RESTRAINT SYSTEM - TIGHTENING TORQUES .

Remove anchor fitting (2).

Installation: 

Make sure anchor fitting is correctly seated on seat mechanism pin.

Fig 2: Identifying Anchor Fitting And Screw
G04728054Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Tightening torque 72 11 4AZ. See RESTRAINT SYSTEM - TIGHTENING TORQUES .

Remove deflector bar (2).

Unscrew bolt (3).

Tightening torque 72 11 3AZ. See RESTRAINT SYSTEM - TIGHTENING TORQUES .

Set down belt deflector with belt (4).

Fig 3: Identifying Deflector Bar, Bolt And Screws
G04728055Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Tightening torque 72 11 1AZ. See RESTRAINT SYSTEM - TIGHTENING TORQUES .

Remove automatic reel (3).

Installation: 

Coding (2) of automatic reel must be seated in body opening.

Fig 4: Removing Automatic Reel
G04728056Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals