51 11 185 Removing and installing / replacing side grille for bumper trim

Necessary preliminary tasks:

NOTE: The operation is described on the left side; proceed in the same way for the right side.

6-cylinder models only:

Release catches (1) from inside, taking care not to damage catch (2).

Remove trim (3) towards front.

Installation:

Catches (1 and 2) must not be damaged.

Fig 1: Identifying Catches And Trim (6-Cylinder Models Only)

Courtesy of BMW OF NORTH AMERICA, INC.

Release catches (1) on bumper trim (2).

Installation:

Catches (1) on bumper trim (2) must not be damaged.

Fig 2: Identifying Catches And Bumper Trim

Courtesy of BMW OF NORTH AMERICA, INC.