41 11 028 Left Engine Carrier Replacement (Partial Replacement Before Front Axle)

Read contents of Body, General. 

Remove or cover those vehicle components in the repair area which are susceptible to heat or dust.

Place vehicle on straightening bench.

Following new body parts are required:

• (1) Partial section, engine carrier
  Fig 1: Identifying Partial Section Of Engine Carrier

  Courtesy of BMW OF NORTH AMERICA, INC.

Mark severance cut (1) in middle of 20 mm dia. bore and cut.

Preparation of new part: 

Mark severance cut (1) in accordance with vehicle and cut.

Installation: 

Adjust all new parts to fit with straightening attachment or universal mount.

Weld in Reinforcement Plate  at severance cut.

Preparation of new part: 

Open weld joints in areas (1).

Take off holder.