41 35 102 Rear Left Side Panel Replacement (Partial Replacement Before Longitudinal Member Cover)

Read contents of Body, General. 

Use only approved Spot-Welding Apparatus  for repairs!

Remove or cover those vehicle components in the repair area which are susceptible to heat or dust.

Following new body parts are required:

• (1) Partial section, rear side panel
  Fig 1: Identifying Rear Left Side Partial Panel

  Courtesy of BMW OF NORTH AMERICA, INC.

Mark severance cuts in accordance with specified measurements and cut.

Measurement a = 100 mm from roof edge

Measurement b = approx. 90 mm from middle of lower lock striker screw point

Open weld joints in areas (1).

Installation information: 

• Apply window glass adhesive to Cavity Acoustic Baffles  (2).
• Weld in Reinforcement Plates  at severance cuts.

Open weld joints in areas (1).

Open brazed joint in areas (2).