51 71... MULTIFUNCTION Pan Removal And Installation Or Replacement

Necessary preliminary tasks:

Release screws (1).

Remove guide (2).

Fig 1: Identifying Guide And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Fig 2: Identifying Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove cover (2).

Fig 3: Identifying Cover And Mounting Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Release nuts (1) and remove multifunction pan.

For tightening torque refer to 51 71 9AZ in 51 71 SEALS AND LOOSE BODY PARTS .

Fig 4: Identifying Pan Mounting Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Seals (1) on multifunction pan (2) must be replaced each time they are removed.

Fig 5: Identifying Seals And Pan

Courtesy of BMW OF NORTH AMERICA, INC.