51 23 155 Removing and installing/replacing bar for retaining hook

Necessary preliminary tasks: 

• Remove Front Bumper 

Release screws (1) and clips (3).

Remove intake cover (2).

Fig 1: Identifying Screws, Clips And Intake Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) on bar (2).

Fig 2: Identifying Screws And Bar

Courtesy of BMW OF NORTH AMERICA, INC.

Release catches (1) on cooling air guide (2).

Feed out cooling air guide (2) with bar towards front.

Feed bar out of cooling air guide (2).

Fig 3: Identifying Catches And Cooling Air Guide

Courtesy of BMW OF NORTH AMERICA, INC.