System functions: Notes
With the Condition Based Service a maximum of 10 maintenance operations are realized:
Engine oil
- Diesel particulate filter (either as standard or option)
*changed with new definition*
- Microfilter
*changed with new definition*
- Front brake pads
- Rear brake pads
- Spark plugs
*changed with new definition*
- Vehicle check
- Brake fluid
- Statutory vehicle inspection
- Statutory emissions test
*changed with new definition*
- Pre-delivery check
(service function)
For reasons of clarity, maintenance operations and their intervals will be given first (valid for EURO vehicles).
In certain countries, different values may be applicable for e.g. engine oil or spark plugs.
SPARK PLUG SPECIFICATIONS
| Scope | Interval | Starting value/interval forecast | Time reference | |
|---|---|---|---|---|
| (calculated by) | Distance [km] | Time [months] | ||
| Engine oil (DME/DDE) | flexible | DME: 25.000 DDE: 30.000 |
24 | On-board date |
| Diesel particulate filter
(DDE, optional as special equipment in E90) *changed with new definition* |
flexible | 200.000 | - | - |
| Microfilter
(IHKA/IHKR/IHR) *changed with new definition* |
flexible | 45.000 | 24 | On-board date |
| Front brake pads (DSC) | flexible4 | 40.000 | - | - |
| Rear brake pads (DSC) | flexible | 50.000 | - | - |
| Spark plugs
(instrument cluster) *changed with new definition* |
fixed | 100.000 (60,000 for a 1.6 litre sparkignition engine) |
- | - |
| Vehicle check (instrument cluster) | fixed | DME: 50.000 DDE: 60.000 |
48 | On-board date |
| Brake fluid (instrument cluster) | fixed | - | 24 | On-board date |
| Statutory vehicle inspection (instrument cluster) | country-specific | - | encodable | On-board date |
| Statutory emissions test (instrument cluster) *changed with new definition* |
country-specific | - | encodable | On-board date |
IMPORTANT:
The reference time for time-dependent maintenance operations is the on-board date.
The on-board date is used for the display of escalation (green symbol, yellow symbol, red symbol). In addition, the on-board date is the basis for sorting the maintenance requirements in the display.
The on-board date stands still when the battery is flat or disconnected and must subsequently be corrected in the vehicle.
The on-board date must be set correctly when resetting maintenance requirements. Resetting is described in the general service information.
The on-board date is used for the display of escalation (green symbol, yellow symbol, red symbol). In addition, the on-board date is the basis for sorting the maintenance requirements in the display.
The on-board date stands still when the battery is flat or disconnected and must subsequently be corrected in the vehicle.
The on-board date must be set correctly when resetting maintenance requirements. Resetting is described in the general service information.