65 82 010 Removing and Installing (Replacing) Control Display

Necessary preliminary tasks: 

• Disconnect battery negative lead  . See 12 00 ... INSTRUCTIONS FOR DISCONNECTING AND CONNECTING BATTERY .
• Remove wood trim on instrument panel  on right. See 51 45 366 REMOVING AND INSTALLING/REPLACING WOOD TRIM ON RIGHT .

Release screws (1).

Remove control display (2) in direction of arrow.

Unlock plug connection behind and disconnect.

Remove control display (2).

Installation: 

Guides (1) of control display (2) must be exactly seated in mountings of instrument panel.

Replacement: 

Carry out coding/programming.

Observe following IDC specifications:

• Programming
• Coding
• Car & Key Memory
• CD "CIP"
  Fig 3: Identifying DIS Screen

  Courtesy of BMW OF NORTH AMERICA, INC.