51 24 Rear lid locks
REAR LID LOCKS - TIGHTENING TORQUE SPECIFICATIONS (1AZ - 10AZ)
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Banjo bolt to hydraulic unit and to hydraulic cylinder | E39 / Touring | 10+2.5 N.m. | ||
| E65 / E66 / E67 | 15 N.m. | |||
| 2AZ Oil filler plug to hydraulic unit | E65 / E66 / E67 / E39 / Touring | 8+2 N.m. | ||
| E61 | 1+0.3 N.m. | |||
| 3AZ Engine bolt to hydraulic unit | E65 / E66 / E67 | 5+1.5 N.m. | ||
| 4AZ Hydraulic unit to bracket | E61 | 2+1.5 N.m. | ||
| E65 / E66 / E67 | 10 N.m. | |||
| 5AZ Rear lid lock to rear lid | E60 / E63 / E64 / E65 / E66 / E67 / E85 / E86 | 10 N.m. | ||
| E91 | 20 N.m. | |||
| 6AZ Striker to body | E60 / E63 / E64 / E65 / E66 / E67 / E85 / E86 | 10 N.m. | ||
| 7AZ Bracket, hydraulic unit, to body | E65 / E66 / E67 | 10 N.m. | ||
| 8AZ Bracket, angle sensor, to body | E65 / E66 / E67 | 7 N.m. | ||
| 9AZ Valve to hydraulic unit | E65 / E66 / E67 | 14 N.m. | ||
| 10AZ Ball pin for hydraulic cylinder to body | E61 | 41 N.m. |