51 2 190 Door lock tensioner
Minimum Set: Mechanical Tools
DOOR LOCK TENSIONER SPECIFICATIONS
| Note: | For pretensioning front and rear door locks during installation. Change to tool through use of noise-optimized locks from 02/2004. Illustration items: 1 = Knurled nut 51 2 191, 2 = Support 51 2 192, 3 = Guard 51 2 196, 4 = Mandrel 51 2 197. |
| Series: | E60, E61, E63, E64, E65, E66, E67, E83, E85, E87, E90, E91, RR1 |
| Storage location: | B44, C44 |
| SI number: | 1 06 02 (864) |
| Order number: | 51 2 190 |
| Door lock tensioner | |
| Consisting of: | |
| 1 = 51 2 191 | Knurled nut |
| 2 = 51 2 192 | Rest |
| 3 = 51 2 193 | Guard
NOTE:
Guard is replaced by 51 2 196 with introduction of noise-optimized locks from 02/2004
|
| 4 = 51 2 194 | Mandrel
NOTE:
Mandrel is replaced by 51 2 197 with introduction of noise-optimized locks from 02/2004
|
| 5 = 51 2 195 | Shaped section
NOTE:
E85 (omitted)
|
| 6 = 51 2 196 | Guard
NOTE:
Replaces guard 51 2 193
|
| 7 = 51 2 197 | Mandrel
NOTE:
Replaces mandrel 51 2 194
|