13 72 001 Replacing air cleaner element (N62)

Open retainers (1).

Fig 1: Opening Retainers

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock and disconnect hose.

Raise upper section (2) of intake filter housing and remove to one side.

Remove air cleaner element (1).

Fig 2: Removing Air Cleaner Element

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Clean upper and lower sections of intake filter housing from inside.

Install new air cleaner element.

Installation:

Check sealing ring (1) in upper section (2) of intake filter housing; replace if necessary.

Fig 3: Checking Sealing Ring

Courtesy of BMW OF NORTH AMERICA, INC.