LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2005 >> 745i >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Equipment - Repair Instructions >> Floor - Lugg. Comp. - Engine Comp. Trim Panels >> 51 47 491 Removing and installing/replacing rear underbody protection >> Underbody protection, diesel engines

Underbody protection, diesel engines

Release screws (1 to 3).

Fig 1: Removing Underbody Protection
G03291701Courtesy of BMW OF NORTH AMERICA, INC.

Remove underbody protection (4) towards rear.

Installation: 

Centre underbody protection (4) and tighten down screws (1 to 3).

scientia non olet · About LEMON Manuals