61 35 224 Removing and installing (replacing) control unit for left or right rear door

Necessary preliminary tasks:

CAUTION: Risk of mixing up plugs for door lock and control unit!
Mark relevant plugs prior to removal.

Disconnect plug connections (1).

Fig 1: Removing Control Unit In Rear Door

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (2).

Remove control unit in rear door (3).

Replacement:

Carry out coding/programming.

Observe following IDC specifications:

Fig 2: View Of Control Unit

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Initialize control unit in rear door. Refer to 67 62... NOTES ON INITIALIZING POWER WINDOW .