LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2005 >> 745Li >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> DISC - 745i, 745Li, 760i & 760Li >> Removal & Installation >> Brake Disc (Rear) >> Removal & Installation

Removal & Installation

  1. Remove wheels. If necessary, remove and clean brake linings. See BRAKE LININGS (REAR) .
  2. Release parking brake. Push-button is located left of steering wheel.
  3. Remove bolts (1). See Fig 1. Remove brake caliper and tie up. Brake hose remains connected.
  4. Unscrew bolts and take off disc. See Fig 2.
  5. To install, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS .
Fig 1: Removing Brake Caliper
G00302300Courtesy of BMW OF NORTH AMERICA, INC.
Fig 2: Removing Brake Disc
G00302301Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals