51 21 300 Removing and installing or replacing window recess cover strip on outside of left or right front door
NOTE:
For Special Tool identification, see MAINTENANCE & GENERAL INFORMATION - SPECIAL TOOLS - 545i (4.4L) E60/N62 .
Special Tools Required:
- 00 9 311
Attach adhesive tape (1) below window cavity cover strip (2) (risk of damage).
Using special tool 00 9 311 (beginning at front proceeding to rear), lever out window cavity cover strip (1).
Pull window cavity cover strip (1) out of mirror (2) in direction of arrow.
Installation:
Coat window cavity cover strip (1) with water before fitting. Window cavity cover strip (1) must be flush at rear to door edge.
Installation:
Seal (1) must be correctly fitted in chrome strip (2).