66 54 001 Adjusting night vision camera
NOTE:
Mechanical adjustment - as described in the following - is only possible axially.
Vertical adjustment can only be carried out with the BMW diagnosis system:
Service Functions:
-> Body.
-> Night Vision.
-> Night Vision Camera.
-> Vertical Adjustment.
Necessary Preliminary Tasks:
- Remove grille in bumper trim on left. Refer to 51 11 180 REMOVING AND INSTALLING/REPLACING GRILLE IN BUMPER TRIM (M5 OR M AERODYNAMIC KIT) and 51 11 180 REMOVING AND INSTALLING/REPLACING TRIM GRILL IN BUMPER TRIM .
Set up headlight aiming device (1) at distance (A, approx. 1.5 m) to car.
Align a suitable object (2), here a wooden strip, horizontally on headlight aiming device.
Slowly carry out axial adjustment of night vision camera at adjusting screw (3).
NOTE:
Illustration shows the in-car monitor view.
If necessary, align the picture of the night vision camera with aid of a second person.
Top edge (A) must be aligned parallel to top edge of screen (B).