62 30 005 Removing and installing/replacing trim for head-up display

Special Tools Required: 

• 00 9 317

Lever out trim for head-up display (1) with special tool 00 9 317 from mounting points (2).

Feed trim for head-up display (1) in direction of arrow out of instrument panel trim (2) and remove.

Fig 1: Removing Trim For Head-Up Display Using Assembly Wedge

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Make sure retaining lugs (1) and (2) and sleeve (3) of trim for head-up display (4) are correctly seated.

Fig 2: Identifying Retaining Lugs Of Trim

Courtesy of BMW OF NORTH AMERICA, INC.