32 41 100 Removing and installing/replacing belt pulley on vane pump for power steering
If necessary, remove front assembly underside protection. See 51 47 490 REMOVING AND INSTALLING / REPLACING FRONT UNDERBODY PROTECTION .
Slacken screws (1)
Slacken drive belt and remove from belt pulley (2).
Remove screws (1).
Tightening torque, see 32 41 14AZ in WHEEL & TIRES - TIGHTENING TORQUES .
Remove belt pulley (2) from power steering pump and remove towards bottom.
Installation:
Lettering on belt pulley (2) points forwards.