65 12 200 Removing and installing (replacing) audio system controller
IMPORTANT:
Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .
Comply with notes and instructions on HANDLING OPTICAL FIBERS .
Necessary preliminary tasks:
- Clamp off BATTERY NEGATIVE LEAD .
- Remove MIDDLE TRIM FOR INSTRUMENT PANEL .
IMPORTANT:
Do not scratch center console trim, cover if necessary.
Release screws (1).
Tightening torque: 2.8 Nm
Pull back audio system controller (2) slightly.
Disconnect associated plug connections.
Remove audio system controller (2).
Replacement:
Carry out PROGRAMMING/CODING .