12 14 512 Replacing Pulse Generator On Left Exhaust Camshaft (N62, N62TU)

WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2010 BMW X5, 2010 BMW 650i, 2009 BMW X5, 2009 BMW 650i, and 2008 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

(cylinder bank 5 to 8)

Necessary preliminary tasks:

Read out fault memory of DME control unit; if necessary, work through test schedules
Switch off ignition.
Remove ACOUSTIC COVER
Remove left ignition coil cover

Release plug connector (1) and pull off.

Fig 1: Identifying Plug Connector

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw.

Remove pulse generator (2).

Installation:

Replace sealing ring and coat with antiseize agent.

Fig 2: Identifying Pulse Generator

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE:

Now clear the fault memory.