LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2005 >> 530i Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Brakes - Repair) >> Removal & Installation >> Brake Lines >> Removal & Installation

Removal & Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2006 BMW X5, 2005 BMW X5, 2004 BMW X5, 2003 BMW X5, and 2002 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply pedal prop and depress brake pedal slightly. This prevents brake fluid from flowing out of expansion tank and into brake system when brake lines are opened.
  2. Disconnect brake hose from line.
    3. NOTE: Brake pipes are only supplied straight, in correct length and fitted with connecting nipples.
  3. Bend new pipe as required using bending tool 34 5 100. Removed pipe can be used as template.
  4. If replacing front brake pipe, move wheels into straight-ahead position. Install new pipe and tighten to specification. See TORQUE SPECIFICATIONS .
  5. Remove pedal prop and bleed brake system. See BLEEDING BRAKE SYSTEM .
scientia non olet · About LEMON Manuals