65 81 060 Removing and installing/replacing outside temperature sensor

WARNING: This page is about a different car, the 2006 BMW 650i, 2005 BMW 645Ci, and 2004 BMW 645Ci. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove front underbody protection, refer to 51 47 490 REMOVING AND INSTALLING / REPLACING FRONT UNDERBODY PROTECTION .

Unfasten plug connection (1) and disconnect.

Unclip outside temperature sensor (2) in direction of arrow from panel (3) and remove.

Fig 1: Uncliping Outside Temperature Sensor (2) In Direction Of Arrow From Panel (3) And Removing

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure outside temperature sensor (2) is correctly engaged.