65 83 570 Removing and installing/replacing CD drive for Car Communication Computer

WARNING: This page is about a different car, the 2006 BMW 650i, 2005 BMW 645Ci, and 2004 BMW 645Ci. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

NOTE: For special tools, refer to AUDIO, NAVIGATION & ANTI-THEFT - SPECIAL TOOLS - 645CI (E63) .

64 1 020

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection), refer to 61 35 ... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) .

Necessary preliminary tasks:

Remove front trim for Car Communication Computer, refer to 65 83 560 REMOVING AND INSTALLING/REPLACING FRONT TRIM FOR CAR COMMUNICATION COMPUTER .

Raise cover (1) with special tool 64 1 020 all round and remove from Car Communication Computer (2).

Fig 1: Raising Cover (1) With Special Tool 64 1 020 All Round And Removing From Car Communication Computer (2)

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Feed CD drive for Car Communication Computer (2) in direction of arrow out of Car Communication Computer (3) and set down.

Fig 2: Feeding CD Drive For Car Communication Computer

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Ensure correct routing of cables.

Release screws (1).

Remove CD drive trim (2) in direction of arrow from CD drive for Car Communication Computer (3).

Fig 3: Removing CD Drive Trim In Direction Of Arrow From CD Drive For Car Communication Computer

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Ensure correct routing of cables.

Disconnect plug connections (1) and (2) in direction of arrow and remove CD drive for Car Communication Computer (3).

Fig 4: Disconnecting Plug Connections

Courtesy of BMW OF NORTH AMERICA, INC.