64 11 916 Replacing temperature sensor for cold-air distributor
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove audio system controller, refer to 65 12 200 REMOVING AND INSTALLING (REPLACING) AUDIO SYSTEM CONTROLLER , remove Car Communication Computer, refer to 65 83 010 REMOVING AND INSTALLING/REPLACING CAR COMMUNICATION COMPUTER .
Disconnect plug connection (2).
IMPORTANT:
Do not bend temperature sensor for cold-air distributor (1).
Turn temperature sensor for cold-air distributor (1) counterclockwise, feed out towards bottom and remove.
If necessary, release screws (3) and (4).
Pull back center function carrier (5) at top slightly.
Installation:
Make sure temperature sensor for cold-air distributor (1) is correctly seated.