62 30 005 Removing and installing/replacing trim for head-up display

WARNING: This page is about a different car, the 2006 BMW M6, 2006 BMW 650i, 2005 BMW 645Ci, and 2004 BMW 645Ci. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

NOTE: For special tools, refer to INSTRUMENTS - SPECIAL TOOLS - 645CI (E63) .

00 9 317

Lever out trim for head-up display (1) with special tool 00 9 317 from mounting points (2).

Fig 1: Levering Out Trim For Head-Up Display With Special Tool 00 9 317

Courtesy of BMW OF NORTH AMERICA, INC.

Feed trim for head-up display (1) in direction of arrow out of instrument panel trim (2) and remove.

Installation:

Make sure retaining lugs (1) of trim for head-up display (2) are correctly seated.

Fig 2: Ensure Retaining Lugs Of Trim For Head-Up Display Are Correctly Seated

Courtesy of BMW OF NORTH AMERICA, INC.