61 31 193 Removing and installing/replacing button unit (for on-board monitor)
WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 00 9 341 . See MAINTENANCE AND GENERAL INFORMATION - SPECIAL TOOLS .
Unclip button unit (1) with special tool 00 9 341 at retaining points (2) and lever out in direction of arrow.
Unlock and disconnect associated plug connection, remove button unit (1).