52 24 010 Removing and installing/replacing backrest for rear seat (basic)
WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove REAR SEAT
- Remove MIDDLE SEAT BELT
- Open LOCK on rear seat back (emergency actuator)
Release screws (1).
Feed backrest out of belts and lift out towards front.
Installation:
Pay attention to precise guidance (2).
Tightening torque: see 1AZ in 52 24 REAR SEAT (NORMAL), MANUAL