33 4 460 Set of tools
WARNING: This page is about a different car, the 2010 BMW 650i, 2009 BMW 650i, 2008 BMW 650i, and 2007 BMW 650i. However, it is still accessible from the selected car via links, so may be relevant.
Minimum set: Mechanical tools
In conjunction with: 33 4 450
Note: For removing and installing camber arm rubber mount on rear axle carrier.
Series: E60, E61, E63, E64, E65, E66, E67, E70, E81, E85, E86, E87, E90, E91, E92, E93, RR1, RR2
Storage location: B49, C49
SI number: 1 15 04 (117)
Order number: 33 4 460
Set of tools
Consisting of:
1 = 33 4 461 Draw-in disk
2 = 33 4 462 Pull-out disk
3 = 33 4 463 Counter support
4 = 33 4 464 Support sleeve
5 = 33 4 465 Spindle 205 mm, M12
6 = 33 4 466 Pressure nut