33 4 150 Removal and installation tool

WARNING: This page is about a different car, the 2010 BMW 650i, 2009 BMW 650i, 2008 BMW 650i, and 2007 BMW 650i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

In conjunction with: 33 4 140, 33 3 371

Note: For removing and installing rubber mount on rear axle carrier

Series: E38, E39, E39tou, E46, E52, E53, E60, E61, E63, E64, E65, E66, E67, E70, E83, E85, E86, RR1, RR2

Storage location: B38, B8, C7, C8

SI number: 1 06 94 (801)

Order number: 33 4 150

Removal and installation tool

Consisting of:

1 = 33 4 151 Pressure plate

Note: For removal / model series: E38, E39, E46, E52

2 = 33 4 152 Pressure plate

Note: For installation Model series: E38, E39, E46, E52, RR1

3 = 33 4 153 Support plate

Note: For installation / model series: E38, E39, E46, E52

4 = 33 4 154 Spindle with lock nut

Note: Model series: E38, E39, E46, E52, E60, E61, E63, E64

5 = 33 4 155 Nut with bearing

In conjunction with: 33 3 371 (E46)

6 = 33 4 156 Spindle, long

Note: Model series: E39/2, E65, E66, E67, RR1

7 = 33 4 157 Pressure plate

Note: For installation - model series: E39/2, E65, E66, E67, RR1

8 = 33 4 158 Pressure plate

Note: For removal - model series: E53, E65, E66, E67, RR1

9 = 33 4 159 Support disk

Note: For installation - model series: E53, E65, E66, E67, RR1

Fig 1: Identifying Pressure Plate, Support Plate And Support Disk

Courtesy of BMW OF NORTH AMERICA, INC.