Replacing Camera Washer Jet
WARNING: This page does not describe the selected car, but rather 49 other vehicles, including the 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, 2010 BMW X6, and 2009 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
A washer jet with a direct connection to the headlight washer system for cleaning the lens is mounted on the camera.
Follow the procedure below to replace the washer jet:
- Detach the left ventilation grille from the front spoiler
- Release the two Torx screws (1)
- Release the hose clamp on the connecting hose to the headlight washer system and detach the washer jet towards the front
- Reinstall all parts that have been removed in reverse order