LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2005 >> 530i Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1153 (BMW Night Vision -- Overview) >> BMW Night Vision >> Service Information >> Displays in Event of a Fault >> Initialization

Displays in Event of a Fault: Initialization

WARNING: This page does not describe the selected car, but rather 49 other vehicles, including the 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, 2010 BMW X6, and 2009 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

When replacing the camera, it is always necessary to initialize the software by entering a clearance code (FSC).

The camera is programmed by means of a control unit. The control unit receives the programming and coding data for the camera via the K-CAN. The control unit forwards these data to the camera via the LIN bus.

scientia non olet · About LEMON Manuals