Axial Camera Adjustment
WARNING: This page does not describe the selected car, but rather 49 other vehicles, including the 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, 2010 BMW X6, and 2009 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
The camera can be axially readjusted by means of an adjusting screw on the housing.
The following procedure must be performed:
- Detach the left ventilation grille from the front spoiler
- Position the headlight aiming device in front of the vehicle
- Engage a Torx screwdriver and move the camera to the desired position
- Reassemble all parts that have been removed in reverse order