LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2005 >> 530i Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1124 (Audio, Navigation And Anti-Theft - Repair) >> 77 Airbag triggering unit, diagnosis unit >> 65 77 016 Removing and Installing/Replacing Airbag Control Unit (Build Date From 09/2005)

65 77 016 Removing and Installing/Replacing Airbag Control Unit (Build Date From 09/2005)

WARNING: This page is about a different car, the 2009 BMW 650i, 2008 BMW 650i, and 2007 BMW 650i. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

Note airbag safety instructions!  See 61 35... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE)

Incorrect handling can activate airbag and cause injury.

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection). See 61 35... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE)

Necessary preliminary tasks: 

If necessary, remove rear compartment air duct and disconnect associated plug connections.

Disconnect plug connection (1).

Release screws (2) and remove airbag control unit (3).

Tightening torque 65 77 1AZ.  See 65 77 AIRBAG TRIGGERING CONTROL

Fig 1: Identifying Screws & Plug Connections
G04761963Courtesy of BMW OF NORTH AMERICA, INC.