37 14 511 Replacing front ride-height sensor (M5, M6)

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection). See 61 35 ... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) .

Necessary preliminary tasks:

Remove right steering gear cover.

Release nut (1) and disconnect jointed rod. Tightening torque, see 37 14 7AZ in 14 ELECTRICAL COMPONENTS . Release screws (2), remove ride-height sensor from bracket and disconnect plug connection (3).

Installation: Sensor lever must point from ride-height sensor to right front wheel. Tightening torque, see 37 14 6AZ in 14 ELECTRICAL COMPONENTS ..

After installation: Check headlight adjustment, correct if necessary. See 63 10 004 ADJUSTING HEADLIGHTS .