33 17 005 Replacing rubber mount for rear differential mounting at rear (M6)

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

33 4 281
33 4 282
33 4 283
33 4 284
33 4 465
33 4 466 See REAR AXLE - SPECIAL TOOLS .

Necessary preliminary tasks:

Remove Rear Differential

IMPORTANT: Do not draw rear PUR mount as far as it will go into special tool 33 4 281.

Withdraw rear PUR mount with special tools 33 4 282 , 33 4 281 , 33 4 466 , 33 4 465 and nut (1).

Fig 1: Withdraw Rear PUR Mount With Special Tools

Courtesy of BMW OF NORTH AMERICA, INC.

Disassemble special tools. Withdraw rear PUR mount with the aid of a vice from special tool 33 4 281.

IMPORTANT: Coat bearing bushing in rear axle carrier and new rear PUR mount (1) with Circolight

Install rear PUR mount (1) in special tool 33 2 182.

Fig 2: Install Rear PUR Mount (1) In Special Tool

Courtesy of BMW OF NORTH AMERICA, INC.

Draw in rear PUR mount (1) with special tools 33 4 181, 33 2 182, 33 4 284, 33 4 466 and 33 4 465 as far as it will go.

Fig 3: Draw In Rear PUR Mount (1) With Special Tools

Courtesy of BMW OF NORTH AMERICA, INC.