32 41... Replacing level switch for Dynamic Drive fluid reservoir

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Detach fluid reservoir from holder, raise and if necessary remove sideways
Disconnect plug connection (1).

Turn level switch (2) through approx. 45° and remove towards bottom.

Fig 1: Identifying Plug Connection And Level Switch
Courtesy of BMW OF NORTH AMERICA, INC.