17 11 000 Removing and installing radiator (M54)
WARNING:
Danger of scalding! Only perform these tasks on an engine that has cooled down.
Recycling:
Catch and dispose of coolant in a suitable container.
Observe country-specific waste-disposal regulations.
Necessary preliminary tasks:
- Remove radiator cover
- Draining coolant
- Remove fan cowl with electric fan
Release retaining spring (2).
Detach coolant hose (3).
Installation:
Resecure retaining spring (2).
Coolant hose (3) must snap audibly into place.
Release catch (1) in direction of arrow.
Disengage mounting plate (2) in direction of arrow.
Installation:
Engage mounting plate (2) in mounting (3).
Unlock and detach coolant hose (1).
Detach vent line (2) from expansion tank.
Remove radiator (3) in direction of arrow.
Installation:
Ensure correct seating in side guides.
Coolant hose (1) must snap audibly into place.
Vent cooling system and check for leaks.