65 13 188 Removing and installing/replacing rear mid-range speaker (in rear shelf)

Lever speaker cover (1) with special tool 00 9 341 (removal aid) out of rear shelf (2).

Fig 1: Identifying Lever Speaker Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Lugs (1) and locks (2) of speaker cover (3) must not be damaged.

Make sure speaker cover (3) is fully engaged.

Fig 2: Identifying Lugs And Locks Of Speaker Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove mid-range speaker (2) upwards from rear shelf (3).

Disconnect associated plug connection and remove mid-range speaker (2).

Fig 3: Removing Mid-Range Speaker Upwards From Rear Shelf

Courtesy of BMW OF NORTH AMERICA, INC.