65 77 016 Removing and installing/replacing airbag control unit (build date from 09/2005)
WARNING:
Note airbag SAFETY INSTRUCTIONS !
Incorrect handling can activate airbag and cause injury.
IMPORTANT:
Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION)
.
Necessary preliminary tasks:
- Disconnect BATTERY NEGATIVE LEAD .
- Remove CENTER CONSOLE .
If necessary, remove rear compartment air duct and disconnect associated plug connections.
Disconnect plug connection (1).
Release screws (2) and remove airbag control unit (3).
Tightening torque: 8 Nm